Kingston 8GB 1600... 

Kingston 8GB 1600MHz DDR3 PC3-12800 RAM

Stock Code: 23D8GK
Stock: 1 - 3 Days
$126.00
Qty:

Description:

Kingston 8GB 1600MHz DDR3 Non ECC CL11 DIMM RAM Module - KVR16N11/8


Description

DESCRIPTION

This document describes ValueRAM's 1G x 64-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB : Height 1.180” (30.00mm), double sided component

SPECIFICATIONS

CL(IDD): 11 cycles
Row Cycle Time (tRCmin): 48.125ns (min.)
Refresh to Active/Refresh: 260ns (min.) Command Time (tRFCmin)
Row Active Time (tRASmin): 35ns (min.)
Maximum Operating Power: 2.580 W*
UL Rating: 94 V - 0
Operating Temperature: 0C to 85C
Storage Temperature: -55C to +100C
*Power will vary depending on the SDRAM used

Shopping Cart
Shopping cart is empty.

Join Our Mailing List

Enquiry

Refresh

Book A Service Call

Refresh
© Copyright 1988-2016 Standard Computers Australia Pty Ltd. - E.&O.E. - Prices are subject to change without notice.